Phonak Target

System Requirements

In order to install and run Phonak Target 7.1.9, you'll need to make sure you have at least:

Requirements Recommended
Operating system Windows 10, Home / Pro / Enterprise 
Windows 8.1, Pro / Enterprise 
Windows 7, latest SP, Enterprise with extended security update
Processor Intel Core or higher performance
RAM 4 GB or more
Hard disk space 3 GB or more
Screen resolution 1280 x 1024 pixels or more
Graphic card 16 Million (24bit) screen colors or more
Drive DVD
Serial COM port Only if RS-232 HI-PRO is used
USB ports
One for each purpose
  • Bluetooth adaptor
  • Accessory programming
  • HI-PRO if used via USB port
  • Noahlink Wireless
Programming interfaces Noahlink Wireless / iCube II / NOAHlink / RS-232 HI-PRO / HI-PRO USB / HI-PRO 2
NOAHlink driver Latest version available
Noahlink Wireless driver Latest version available
Internet connection Recommended
Sound card Stereo or surround 5.1
Playback system 20 Hz – 14 kHz (+/- 5 dB), 90 dB
NOAH version Latest version (NOAH 4.4.2280 or higher)
Please check the NOAH limitations for Windows 64 bit operating systems on http://www.himsa.com
TargetMatch Noah Version 4.4.2280 or higher
Natus® Otosuite 4.81.00 or higher
Natus Aurical FreeFit for REM & Aurical HIT for test box measurements

   

1 The Bluetooth® is a registered trademark owned by the Bluetooth SIG, Inc.

2 Please check the NOAH limitations for Windows 64 bit operating systems on http://www.himsa.com